Absolute Depth Filter Cartridges
Absolute Filter Cartridges
Absolute-rated depth filter cartridge provides superior flow, increased dirt-holding capacity and a lower pressure drop. The cartridge is manufactured with 100% polypropylene microfibers and core. Thermal bonding eliminates the need for bonding resins and adhesives, which may be contaminants themselves. The innovative core provides stability, which allows for the use of very fine microfibers to greatly improve the filtration efficiency. The microfibers vary in thickness throughout the depth of the cartridge to attain an optimal gradient density with a much larger void area. Absolute depth filter cartridges deliver highly cost effective filtration solutions.
They are excellent for many high purity and standard industrial applications including chemical process industry, pure water filtration, metal finishing, metal working, magnetic media, photographic, petrochemicals and potable water.
They are excellent for many high purity and standard industrial applications including chemical process industry, pure water filtration, metal finishing, metal working, magnetic media, photographic, petrochemicals and potable water.
Features | |
---|---|
|
|
Specifications | |
---|---|
Micron Ratings | 1, 3, 5, 10, 25, 35, 50, 75, 100 |
Outer Diameter | 2.5" |
Lengths | 9.75", 10", 19.5", 20", 29.25", 29.75", 30", 40" |
Endcaps | All standard endcap types |
Gaskets | Buna, Viton, EPDM, PTFE |
PECOFacet Petro-PEACH® (PPL)
PETRO-PEACH® consists of several lateral sections of PEM
media formed into a conical helix pattern. Each section
consists of multiple helical wrapped layers. Through thermal
bonding, layers are applied to conform and overlap the
previous layer, forming a cone…the conical helix structure.
This structure results in a graded density pattern that yields
high contaminate loading, structural strength, maximum
efficiency, and excellent reproducibility.
Specifications | |
---|---|
Flow Direction | Outside to Inside as Standard, reverse flow designs possible |
Media | Polypropylene, Polyester |
Recommended Change-out D.P. | 1.7 - 2 bar |
Micron Ratings | 2, 5, 10, 15, 20, 40 |
pH-Range | Polypropylene (0-14) Polyester (0-9) |
Operating temperatures |
Polypropylene 82°C Polyester 116°C |
Core | None |
Endcaps | All standard endcaps |
Gaskets | None required on Double-open-end design Buna-n, Viton, EPR and Silicone on other end cap options. |
End Cap Accessories | Springs - Carbon Steel or Stainless |