Graver Pleated Standard Elements
Absolute graded Elements (PMA)
This all polypropylene filter retains particles with absolute efficiency.
Available in a broad range of pore sizes, it is suitable
for a wide range of applications. The pleated construction
provides a high surface area to offer outstanding overall
filtration economy.
- Micron ratings from 0.2 to 100 μm– Broad application range
- Meets current USP Class VI biological test for plastics – Acceptable for food & beverage contact
- “Absolute” Efficiency– Rated at 99.98% (Beta 5000)
- Competitive surface area– High flow rates, and long online service– Minimize maintenance cost
- Fixed pore structure– Eliminates dirt unloading at maximum differential pressure
- Polypropylene Construction– Inert to many process fluids
- Various Gasket/O-Ring materials– Compatible with a variety of fluids
- Manufactured in continuous lengths up to 40 inches
SPECIFICATIONS | |
---|---|
Recommended Change-out D.P. | 2.4 bar |
Max. D.P. | 5.2 bar @ 21°C 2.8 bar @ 80°C |
Max. Operating Temp. | 80 °C |
Grades | 0.2, 0.45, 1.0, 2.5, 5.0, 10, 25, 50, 100μm |
Media | Polypropylene |
Hardware | Polypropylene |
Lengths | 5", 9.75", 10", 20", 30", 40" |
Gasket/O-Rings | Buna-N, EPDM, Silicone, Viton, Teflon, Encapsulated Viton (O-Rings only) |
Nominal graded Elements (PMC)
This cost effective, disposable filter element can be used for
a wide range of applications. The filter is constructed of
pleated polypropylene filter media with high surface area
that allows for greater system flow rate.
- Micron ratings from 0.2 to 50 μm– Broad application range
- High Filtration Efficiency– 90% (Beta 10) rated
- Meets current USP Class VI biological test for plastics
- FDA listed materials of construction
- Fixed pore structures– Resists unloading of captured contaminant
- Polypropylene Construction– Inert to many process fluids
- Various Gasket/O-Ring materials– Compatible with a variety of fluids
- Economically efficient filtration
- Manufactured in continuous lengths up to 40 inches
SPECIFICATIONS | |
---|---|
Recommended Change-out D.P. | 2.4 bar |
Max. D.P. | 5.2 bar @ 21°C 2.8 bar @ 80°C |
Max. Operating Temp. | 80 °C |
Grades | 0.2, 0.25, 0.45, 0.5, 1.0, 2.0, 5.0, 10, 25, 50μm (other micron ratings available upon request) |
Media | Polypropylene |
Hardware | Polypropylene |
Lengths | 5", 9.75", 10", 20", 30", 40" |
Gasket/O-Rings | Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Rings only) |