Graver Pleated High-Efficiency Elements
Absolute graded Elements (QMA)
This filter is constructed with a high surface area melt blown
polypropylene media for low initial pressure drop, high dirt
holding capacity, and high efficiency performance.
- Micron ratings from 0.2 to 20μm – Broad application range
- Meets current USP Class VI biological test for plastics
- "Absolute" Efficiency – Rated at 99.98% (Beta 5000)
- High surface area – High flow rate, and long service life – Minimize maintenance cost
- Fixed Pore construction – Resists dirt unloading at maximum differential pressure
- Polypropylene Construction – Inert to many process fluids
- Various Gasket/O-ring materials – Compatible with many fluids
- Heavy duty molded cage – High structural strength
- Highly consistent melt blown media for consistent performance
SPECIFICATIONS | |
---|---|
Max. D.P. | 5.2 bar @ 21°C 2.8 bar @ 80°C |
Max. Operating Temp. | 80 °C |
Grades | 0.2, 0.45, 1.0, 2.5, 5.0, 10, 20μm |
Media | Polypropylene |
Hardware | Polypropylene |
Lengths | 5", 9.75", 10", 20", 30", 40" |
Gasket/O-Rings | Buna-N, EPR, Silicone, Viton, Teflon, Encapsulated Viton (O-Rings only) |
Nominal graded Elements (QMC)
An innovative product manufactured with multiple layers of
melt blown polypropylene media. This unique structure allows
high flow rates while maintaining low differential pressure
and ideal depth filtration characteristics.
- Micron ratings from 0.1 to 10 μm– Broad application range
- Meets current USP Class VI biological test for plastics
- FDA listed materials of construction
- High Filtration Efficiency – 95%
- Graded pore structure – Multilayer, media for high dirt holding capacity
- Fixed pore construction – Resists dirt unloading at maximum differential pressure
- Polypropylene construction – Inert to many process fluids
- Various Gasket/O-ring materials – Compatible with many fluids
SPECIFICATIONS | |
---|---|
Recommended Change-out D.P. | 2.4 bar |
Max. D.P. | 5.5 bar @ 21°C 2.8 bar @ 80°C |
Max. Operating Temp. | 80 °C |
Grades | 0.1, 0.2, 0.4, 0.6, 1.0, 3.0, 5.0, 10.0μm |
Media | Polypropylene |
Hardware | Polypropylene |
Lengths | 5", 9.75", 10", 20", 30", 40" |
Gasket/O-Rings | Buna-N, EPDM, Silicone, Viton, Teflon, Encapsulated Viton (O-Rings only) |