Nominal Depth Filter Cartridges

Meltblwon filter cartridges are designed for high efficiency and fewer change-outs. Our meltblown filters are manufactured through an exclusive process that thermally bonds pure polypropylene microfibers. Smaller diameter fibers are at the surface and sequentially larger diameter fibers are used toward the center. This process traps particles more evenly throughout the cross section.
Standard meltblown filter cartridges are manufactured without a core. For applications with higher PSI ratings, the filter cartridge is available with a polypropylene core, offering the same high efficiency and long life.
The meltblown depth filter is a nominally rated filter that works well as either a pre-filter or final filter in a wide range of applications including industrial, chemical process, food and beverage, cosmetics, and water.

Features

Manufactured from 100% polypropylene microfibers eliminating extractables Adsorbs trace hydrocarbons for clearer results and faster rinse-in A superior filter cartridge that works better, has greater dirt-holding capacity, and lasts longer Provides high flow rates with lower pressure drops for longer life at a very economical price Singed finish eliminates fiber migration and produces a cleaner product Supports a wide range of chemical, industrial, food/beverage, cosmetics and water applications

Available in 1-100 microns to meet a wide range of cleanliness applications Incinerates to non-volatile trace ash for easy disposal NSF certified, FDA approved and rated USP Plastic Class VI to meet government regulations Silicone free material eliminates cratering to provide better surface results In-stock availability assures quick delivery and reduces your inventory costs

Specifications
Micron Ratings	1, 3, 5, 10, 25, 50, 75, 100, 150
Outer Diameter	2.5"
Lengths	9.75", 10", 19.5", 19.75", 20", 29.25", 30", 39", 39.5", 40", Custom lengths available

PEACH® 90 consists of several lateral sections of PEM media formed into a conical helix pattern. Each section consists of multiple helical wrapped layers. Through thermal bonding, layers are applied to conform and overlap the previous layer, forming a cone…the conical helix structure. This structure results in a graded density pattern that yields high contaminant loading, structural strength, maximum efficiency, and excellent reproducibility

Specifications
Flow Direction	Outside to Inside as Standard
Media	Polypropylene, Polyester
Recommended Change-out D.P.	1.7 - 2 bar
pH-Range	Polypropylene (0-14) Polyester (0-9)
Operating temperatures	Polypropylene 82°C Polyester 116°C
Core	None
Gaskets	None required on Double-open-end design
End Cap Accessories	Springs - Carbon Steel or Stainless Core Extender- Polypropylene, Stainless Steel

RTEC Series filters feature an acrylic fiber/phenolic resin construction that produces an extremely rigid pore structure. This construction allows the filter to withstand extremes of viscosity and temperature without compression or collapse. In addition, a true graded density construction allows complete utilization of the filter’s depth, with coarse particles captured in the outer zones and finer particles captured nearer the core.

Specifications
Recommended Change-out D.P.	2.4 bar
Max. D.P.	4.8 bar
Max. Temperature	122 °C
Grades	1, 3, 5, 10, 25, 50, 75, 100
Media	Acrylic Fiber/Phenolic Resin
Optional End Caps	Polyester
Multi length bonding agent	Polyamide Hot Melt
Gasket/O-Rings	Silicone, EPDM, Buna N, Viton and Teflon encapsulated Viton (o-rings only)